FAQs

 
 Important information about your MASKSEALZ Product:

It is hereby noted that  STICKFX is using this rapid design process to serve the current public health crisis, and the resulting mask, filter, seals and tape are not intended as a replacement or substitute for any personal protective equipment (PPE) currently used by medical or other workers.

It is important to note that these products are not medical products and have not been tested or approved by the U.S. Food and Drug Administration (FDA), National Institute for Occupational Safety and Health (NIOSH) or any other industry or regulatory body, and are in no way certified according to any medical, industrial or other standard. STICKFX therefore makes no claims or guarantees as to their effectiveness, especially as it relates to the transmission of any disease, including but not limited to, Covid-19.

Buy purchasing and using these products you agree to the waiver of liability and indemnity provisions which form part of the the terms of service which can be found at the link below:

https://masksealz.com/policies/terms-of-service.

-MASKSEALZ is recommended for adults and children over 6 years old.
-If you have sensitive skin and experience discomfort while wearing your MASKSEALZ product, discontinue use immediately. 
-If you have allergies to silicone products – do not use this product. 
-MASKSEALZ is not for use on animals. 
-Do not stick your MASKSEALZ product on surfaces that have makeup, dirt, debris, hair, lint etc. as these will adhere to adhesive side and interfere with stickiness.  
-Don’t obstruct breathing passages.
-Don’t eat or ingest your MASKSEALZ product.

Please keep products and packaging away from small children and pets.

How do I apply my MASKSEALZ product?

Remove all makeup.

  1. Thoroughly clean skin with soap/water, rubbing alcohol or astringent. Dry completely.

**if skin is NOT thoroughly cleaned and dried, MASKSEALZ will NOT stick**

    1. Open product/remove product from plastic backing
    2. For Sealz tape, cut to desired size and shape
    3. Lightly place product in desired position
    4. Press firmly working from center outwards

Be sure to keep adhesive side free from dirt and debris.

Product can be easily removed and repositioned – even on areas with hair!

 How do I remove my MASKSEALZ product?

  1. Gently peel product away from skin.
  2. Wash & rinse product thoroughly & sterilize if required.Rubbing alcohol can be used to clean the adhesive.
  3. Ensure product is completely dry before reapplying. Wet fabric will impede the breathability of the mask.
  4. Store product on plastic backing in resealable bag.

Be sure to clean all dirt, debris, hair, etc. from adhesive side for optimum re-adhesion.
Ensure product is completely dry before re-applying 

Why isn’t my MASKSEALZ product sticking?

-Did you clean your skin THROUGHLY with soap/water or alcohol pads before applying? 
-Is your skin 100% dry? Are you sweating? Is your MASKSEALZ product 100% dry? Wet skin or wet product = no sticky.
-Did you thoroughly clean the sticky side of product with rubbing alcohol/ soap and water? Is there a bunch of dirt or debris sticking to the sticky side?
-If you still can’t get your product to stick, it’s time for a brand new MASKSEALZ product!

How many times can I wash and reuse my MASKSEALZ product?

With the correct care, the adhesive should last between 10 and 20 uses.